Once you locate pin 8, thats the pin we will be using as well as the next one over. One side will have the digit 1 and the other digit 8 Locate pin 8 which will have a number on the side of the board. Drill bit 5/16 to make hole in the D-can cover Small philip screwdriver to take the D-can cover offĢ Radio Shack micro on/off switch (can be two prongs or three) and some wire 24 guage.Ĥ. Its actually very simple that any average person can do that has access to a drill and a soldering gun.ġ. You will need to solder a bit but it’s nothing too serious if you follow the instructions to the letter. Cost for this would probably range anywhere between 10 to 20 bucks.
#BMW INPA EDIABAS INSTALL WINDOWS 8 DRIVER#
If not then let windows install the best suitable driver for it) Navigate to Control Panel, Device Manager, and scroll to Ports (COM &.īMW INPA Ediabas 5.0.2 download, inpa 5.06 download, inpa 6.4.7 download here…and install it on Windows XP/ Vista or Windows 7/ 8/ 10 (32bit or 64bit), to get it work with K+DCAN USB cable.īasically, there are two methods for users to get the INPA K+DCAN usb cable, to buy a complete one or simply build one yourself.
#BMW INPA EDIABAS INSTALL WINDOWS 8 DRIVERS#
Allow the device drivers to install (for best driver use the driver that came with your cable.
This is a CD image that you'll need to either burn to a CD or extract to a folder using a tool such as ISOBuster. Extract the contents of the downloaded file 'INPA-6.4.3-full.rar' and you'll find a.NRG file. Click on ‘OK’ and close all the windows, restart your PC to confirm all the changes.
0 kommentar(er)
